SB Series Wire Rope Isolator

Short Bar (SB Series) Isolators are used in applications where there is a limited amount of space and standard helical cable isolators may be too long (“SB Series” isolators are approximately half the length of our standard “M” Series). As with all other IDC products, special materials and finishes are available for our dynamic isolation solutions upon request.

SB Series Wire Rope Isolator

Short Bar (SB Series) Isolators are used in applications where there is a limited amount of space and standard helical cable isolators may be too long (“SB Series” isolators are approximately half the length of our standard “M” Series). As with all other IDC products, special materials and finishes are available for our dynamic isolation solutions upon request.

Category:

Versatile and high performing Helical Cable Isolator

  • Tech Specs
  • Custom Features
  • Custom Solutions
  • Downloads
Image
SB Series Wire Isolators
  • Rugged all metal construction
  • Unequalled temp. Range: -200° F to 500° F
  • Three axis capability (6 DOF)
  • Fail safe construction
  • High damping: C/Cc ≈.15-.20
  • Long life and maintenance free

Below are some of the more common alternate materials used in the manufacture of IDC Cable Isolators. This is by no means a complete list. Please feel free to contact our Engineering Department to discuss any other material not shown below.]

  • Cable: 305 series SS (low magnetic permeability), 316 series SS (improved corrosion resistance), Galvanized steel (more economical), Inconel, Copper, etc…
  • Screws: 305 series SS, 316 series SS, Cad plated alloy steel, Zinc plated alloy steel, 400 series SS, etc…
  • Inserts: Key lock inserts per MS51830 & MS51831, etc…
  • Retainer Bars: 305 series SS, 316 series SS, 400 series SS, Titanium, Copper, Aluminum alloys (2024, 5052, 7075), Alloy steel, etc…
  • Finishes: Zinc plate, Cad plate, Hard anodize, CARC paint, Epoxy paint, Enamel, Polysulfide sealant (corrosion protection), etc…

IDC is prepared to customize your solution with:

  • Custom mounting hole sizes and patterns
  • Custom lengths, heights, and diameters (depending on series)
  • Custom finishes (anodize, paint, alodine, passivation)
  • Stainless Steel bar construction
SB2

Data Sheet

Arrow
SB3

Data Sheet

Arrow
SB4

Data Sheet

Arrow
SB5

Data Sheet

Arrow
SB6

Data Sheet

Arrow
SB6A

Data Sheet

Arrow
SB8

Data Sheet

Arrow
SB10

Data Sheet

Arrow
SB12

Data Sheet

Arrow
SB16

Data Sheet

Arrow
SB18

Data Sheet

Arrow
SB20

Data Sheet

Arrow
SB22

Data Sheet

Arrow
SB24

Data Sheet

Arrow
SB28

Data Sheet

Arrow
SB28

Performance Data

Arrow
SB32

Data Sheet

Arrow

Speak with a Sales Representative

Our representatives have a wealth of knowledge on all our products – let them steer you in the right direction.

Learn More Arrow Arrow